Measure and monitor the temperature via network or Web. At the sensorProbe4 offered by Didactum Security GmbH (Art.Nr. 11097) is a network-enabled, SNMP compatible monitoring system with connection of up to 4 different IP sensors of the internationally active manufacturer of AKCess Pro. Like all remote monitoring systems by AKCess Pro, the sensorProbe4 performed their service without dependencies on other hardware or software. So, the installation of further software for the operation of the SNMP-compatible monitoring system is not required. Ideal for the stand-alone temperature monitoring heterogeneous operating system environments. IP sensor temperature for temperature measurement after the installation of sensorProbe4 in the technical or server rack, close this IP monitoring unit simply to your network switch on.
Then simply connect the IP sensor temperature (Art.Nr. 10176) via a network cable with the sensorProbe4 monitoring unit. A 1.5 meter long Cat5e network cable is included with the SNMP-compatible temperature sensor contain. On request, you can use also a up to 300 metre network cable (Cat5/6/7). Since the IP sensor temperature already specifications long term has been calibrated according to ISO, you can immediately start temperature monitoring with the. Using a Web browser (MS Internet Explorer / Firefox / Google chrome, etc) then accessing IP thermometer on the Web interface of the sensorProbe4. Here, you can then comfortably set how you want to be alerted when the required room temperature is exceeded or under.
Enter individually selectable limit and alarm values for temperature monitoring. The sensorProbe4 IP thermometer provides notification via email (up to 5 different email addresses) and via SMS (via 3rd party gateway) via SNMP to network – monitoring systems (HP OpenView, IBM Tivoli, Nagios, PRTG, WhatsUp Gold). Using SNMP, you can query the current temperature value directly to the IP-sensor temperature. The temperature measured by the temperature sensor IP are saved in the datalogger of the sensorProbe4 meter network. Using a Web browser, you can in the Web interface of the sensorProbe4 also graphically show the history of the temperature can be. The data of the sensor / temperature values can the sensorProbe measuring system for the purpose of documentation also convenient to programs like Catci or MS-Excel export. 4-Port monitoring system as mentioned above, the sensorProbe4 offers network monitoring device 4 sensor ports for quick installation of AKCP sensors. Didactum Security GmbH holds in addition to IP enabled temperature sensors also smoke alarm sensors (Art.Nr. 10193), water sensors (Art.Nr. 10196), as well as multi sensor temperature and humidity (Art.Nr. 10174) ready. The latter occupy only a single Sensorport of your SNMP compatible sensorProbe4 of measurement and monitoring device. Any of the associated IP is plugged also via plug ‘n’ play on the sensorProbe4 sensor gauge sensors. Imagine so 24/7 surveillance system together and allow timely alert your individual is errors or critical conditions in the listening rooms and equipment!