The value of insulation in the modern building houses. In modern construction the value of insulation, it is difficult to overestimate. It should be understood that the thermal insulation of buildings, we address several key tasks, some of them obvious, is to maintain heat in the building in winter and cooling in summer. In that case, if we consider the process of warming designs in terms of thermal physics, it becomes clear that the insulation protects the supporting structures of extreme temperatures, which in turn increases the lifetime of supporting structures (walls, ceilings). Does not need to forget about the 'dew point', it occurs at the boundary of the negative and positive temperatures, and at this point collects the moisture under the influence after a negative temperature, the moisture crystallizes into ice, and destroys the material supporting structure.
Insulation of this takes the hit, moisture, formed in the thickness of insulation, no way, can not disrupt its structure, and subsequently removed from the layer of insulating material at the expense of permeability plates teloizolyatsii.Vidy insulation, their application. Today, very popular in the construction of two types of insulated material, as you probably can see this basalt insulation and extruded polystyrene. In addition, these insulating materials again have different densities, and a group of combustibility. Suitable for thermal insulation of the basement extruded polystyrene foam for thermal insulation of floors, walls or attic is better to use basalt insulation. The density should be chosen according to the principle – the more load on the supporting structure for a heater, the higher the density.
Flammability, thermal insulation boards should be selected for the foundations of T4, T1 for flat roofs in the other case insulation must be noncombustible (NG). Basalt insulation is classified as non-combustible insulation. Production of basalt insulation is associated with fragmentation and subsequent melting mountain basaltic rocks of the group, followed by the addition of synthetic binder. Then, on tape, mineral 'carpet' is fed to the cutting to size, where the longitudinal and transverse cutters as well-cut slabs given sizes, it is often one meter board, and a width of 0.5-0.6 m thickness of basalt stone can vary from 40 mm to 200 mm. Slabs are packed in the original shrink-wrap, and come to the warehouse of finished products, which should lie at least one day, for that would extinguished all 'korolki' remaining after the melt rock. After that, products are shipped by auto / Railway wagons to the warehouse representatives of factories. Production extruded polystyrene foam is reduced to the extrusion (which means 'extrusion') of polystyrene chips under high temperature with the introduction of a carbon dioxide blowing agent, heated to foam after desired temperature in the polystyrene mass is rolled on the wolves, adjusted for a given thickness, followed by trimming the edges of the insulation and the choice of the quarter. Extruding polystyrene and packaged in shrink-wrap with a company logo. In conclusion, I would like to note that all funds spent on the insulation of the structure, pay off in 2-3 years, by reducing the waste of energy for heating or insulated cooling facilities.
Related posts:
- Construction Of Frame Houses The technology frame construction in contrast to the log house in which the load-bearing elements are the walls. In frame buildings, performs this function of the entire island or laminated wood. Inside...
- Silver Forest The next step is to design and insulation of the roof, flooring boards, interior ceiling paneling, installation of joinery and engineering systems. Despite community, they have significant differences. One is that the...
- Clothing That Regulates Body Temperature Thermal underwear – a product related to high-tech, made of synthetic materials, designed for those who can not live without going on nature, to those who need it and just often located...
- Popular Fireproofing Materials Flame retardants – substances that possess the required effective fire protection, and are used for processing objects in order to fire. But it must be exactly as instructed, use of flame retardants...
- The Choice Of Floor Covering The History of flooring has its roots in ancient times, since the 16th century in Russia were plank flooring of oak staves, they put the picture. Parquet is popular today not only...
