10 years of life cycle of marking technology in automotive industry first it was Daimler (2008), now followed by Audi and BMW: the identification technology of PrintoLUX takes root in the automotive industry, because speak around the relevance and the benefits of the young, thermosetting digital printing process. 10 years of life cycle of marking technology in automotive industry until recently were very long stretched of labels in the industry with an average 10 years product and life cycles. As subordinate components, which were usually supplied by subcontractors, it gave little attention the markings in the plant construction. This was true also in terms of cost: labels make up only a small percentage in the industry cost calculation and evade as part of the surcharge factor of often the figuring and controlling costs. New requirements bring new opportunities changed economic framework conditions and all related efforts of the automotive industry, to make production costs, down to the detail on the test bench in Recently also the identification technology in the visor. The new requirements of the industry on the identification technology: high resistance (markings persist component replacement and must therefore often be more than 10 years to read) and low costs for production and Assembly. For the PrintoLUX process, these new requirements mean a chance to draw attention to the advantages of the process. And PrintoLUX utilizes this chance at several levels: labelling of cables and wires, which was operated for many years with little effort (signs printing, insertion of the shield in a plate, mounting the unit), convinces the PrintoLUX -solution of a highly resistant signs pressures, which saves the use of sign makers.
Also the marking of devices that are exposed to high mechanical loads, the PrintoLUX impressive procedures compared to the conventionally used engraving through significant manufacturing advantages. While the production of engraving a multi-stage Work requires, can be easier and less expensive to produce as high-resistant plates with PrintoLUX. The digital label printing of the young and innovative PrintoLUX leads to booming demand extreme resistance of PrintoLUX marking process the high resistance, which are indispensable for industrial use achieved through his materials and a Thermohartung of pressure. The procedure is inexpensive, leads in the production of labels, especially when compared to the engraving to large simplifying the process and demonstrated in several extreme tests, which were carried out by independent experts (TuV), an exceptionally high resistance. After first convincing practice experiences at companies such as DaimlerChrysler, Audi, and BMW PrintoLUX aroused now industry-wide interest and triggered a demand boom. Press contact Helmuth Bischoff PrintoLUX GmbH of spectroscopically str. 130 67227 Frankenthal/Pfalz phone: 06221-372857 E-mail: the PrintoLUX idea PrintoLUX has developed a system and the patent pending, with certified materials made of metal and plastic in the maximum sizes 300 mm x 500 mm with a height of up to 140 mm can be printed digitally. The system is unique in the world and replaces the previous methods such as screen printing, engraving, lasers in many applications. The system is more flexible, faster and cheaper.